What "actual size" means on a screen
A ruler is actual size when a centimetre on the screen covers the same physical distance as a centimetre on a real ruler. The length is drawn in pixels, so the question is always how many pixels your particular screen needs for one millimetre. No browser knows that on its own.
The convention browsers fall back on is 96 pixels to the inch. That figure comes from desktop display standards rather than from your hardware. On a laptop or a phone, where pixels are much smaller and packed more densely, the convention drifts, and a page that looks like a ruler can be noticeably off from the ruler in your drawer. The escaping ruler drawing is therefore an estimate; one calibration turns it into a measurement.
Calibrate with something whose size is fixed
A card is the easiest reference because card sizes are standardised. The ID-1 format, used by bank cards, loyalty cards and many identity cards, is 85.60 mm by 53.98 mm. Any card that fits your wallet to that format is exactly that size, so it makes a reliable ruler to compare against.
- Press Calibrate under the ruler.
- Choose Bank card in the calibration panel.
- Hold a real card flat against the screen over the outline.
- Move the slider until the outline and the card are the same size, edge for edge.
- Press Save calibration.
The page then stores the resulting scale in this browser, on this device. Nothing is uploaded, and the next visit opens at the calibrated scale.
A US quarter (24.26 mm across) and a 1 euro coin (23.25 mm across) are in the panel as alternatives. Coins are harder to line up than a card because they are round, so the card gives the more precise result when you have one.
Why each device needs its own calibration
The calibration is a property of the screen, not of the site, so a phone and a laptop cannot share one value. A desktop with a 24-inch monitor at one resolution and a laptop with a high-density panel need different numbers of pixels per millimetre to show the same physical centimetre.
That is also why the calibration lives in your browser rather than in an account: it belongs to the device you are holding. If you switch browsers on the same machine, calibrate again.
Three things that break actual size
- Browser zoom. At 125% or 150%, a CSS pixel becomes larger, so a calibrated page is no longer true to scale. Set zoom back to 100% and recalibrate.
- Thicker objects. Holding something a few millimetres above the glass introduces parallax: the eye sees the object shifted relative to the scale underneath. Keep objects flat against the screen.
- Clearing site data. Calibration is stored locally, so clearing cookies and site data erases it. The ruler falls back to the 96 dpi estimate until you calibrate again.
How precise can it get
With a careful card calibration, the scale is typically within a small fraction of a millimetre over the length of the screen. That is enough for everyday jobs: checking a screw diameter, measuring a photo, finding the width of a package, or reading a plan on screen. It is not a substitute for a caliper or a steel rule when a tolerance is specified, and it is never a good idea to measure something valuable by pressing it hard against a screen you would rather keep.
Checks that take five seconds
After calibrating, place a bank card on the ruler. It should measure 85.6 mm across its long edge. A US quarter should measure 24.26 mm across. If both read slightly short or slightly long by the same proportion, the calibration slider was set slightly off; open Calibrate and adjust it again.