Online Ruler

Screen ruler

Online Ruler in Inches

An inch scale drawn at the width your screen reports, divided into eighths and numbered in inches. Calibrate it once and the inches line up with a real ruler.

Drag on the ruler

Press and drag anywhere on the ruler: the reading shows how far that point is from the zero mark.

An inch ruler on your screen

This page opens the ruler with the inch scale already selected. Every inch is numbered, and the space between numbers is divided into eight equal parts, so you can read a length to the nearest eighth of an inch without converting anything.

One inch is exactly 25.4 millimetres. That exact figure is what the page uses to convert between the two scales, so an inch reading here and the centimetre reading on the cm ruler page describe the same distance.

Reading the scale

The long numbered marks are whole inches. Between them, the half-inch mark is the next longest, the quarter-inch marks come next, and the shortest marks are the eighths. A reading of three long marks plus five short ones past the last number is 3 and 5/8 inches.

If you need the value in millimetres, use this table:

Inch fraction Millimetres
1/8 3.175
1/4 6.35
3/8 9.525
1/2 12.7
5/8 15.875
3/4 19.05
7/8 22.225
1 25.4

Getting actual size inches

An inch scale is only useful if an inch on screen is an inch in the room. Browsers cannot know how dense your screen is, so by default they assume 96 pixels to the inch, which is right on some monitors and wrong on many laptops and phones.

The fix is one calibration. Open Calibrate, hold a bank card against the outline and slide until the outline and the card are exactly the same size. Bank cards follow the ID-1 format, 85.60 mm by 53.98 mm, so the outline has a fixed real size to compare against. Press Save and the inch graduations are redrawn at the true scale for that screen. A US quarter and a 1 euro coin are offered if you do not have a card nearby.

The saved value stays in your browser on that device, so the next visit opens with the correct scale already in place. A different device needs its own calibration, because every screen has its own pixel density.

When inches are the right unit

Inches are still the working unit for a lot of everyday measuring: fabric and sewing patterns in the United States, wood and fasteners sold in inch sizes, photo and print sizes quoted as 4 by 6 or 8 by 10, and screen and pipe dimensions in imperial catalogues. When something is specified in inches, measuring it in inches avoids a conversion step and the rounding that comes with it.

If the item is specified in millimetres or centimetres, switch the unit at the top of the ruler rather than converting by hand; the same pointer position reads as both.

Practical tips

Set browser zoom to 100% before calibrating. Zoom changes the size of a CSS pixel, so a calibrated page that is then zoomed will measure wrong until you reset it.

Rest the object flat on the glass. Anything held above the surface sits at a slight angle to the screen, and the reading drifts by a fraction of a millimetre for each millimetre of thickness. For flat items such as paper, cards and photographs the error is negligible.

Measure past the end of the screen in parts. Note where the first part finishes, move the object, and add the second reading to it.

Frequently asked questions

How finely is the inch ruler divided?

The inch scale is divided into eighths, with every whole inch numbered. Each eighth is 3.175 mm.

How do I make the inches actual size?

Hold a bank card (85.60 mm by 53.98 mm, the ID-1 card standard) against the calibration outline and slide until they match. The inch scale then matches a real ruler.

How do I convert an inch reading to centimetres?

Multiply inches by 25.4. For example 3.5 inches is 88.9 mm. The cm setting on this same ruler does the conversion for you if you would rather read the metric side.

Do I need to calibrate again for this page?

No. The calibration is saved in this browser on this device and is used by every ruler page here, including this one.